Scientific-producing enterprise (SPE) Chemprom Service (conversed from Chemprom in 2006) operates at the chemical market since 1992.
Its main activity consists in developing compositions, technologies and production of cationic and amphoteric surface active agents and reagents based on them. The special technological equipment makes it possible to produce up to 5 thousand products of 20 types.
Due to skilled and experienced staff and modern laboratory new compositions, techniques and modified products are developed.
A system of efficient quality product control is provided guaranteeing product stability.
Delivery dates are reduced by availability of tank farm and raw materials.
Chemical products supplied by Chemprom Service are used in oil and gas industry as hydrogen sulphide, carbonic acid and other acids inhibitors, biocides water-repelling agents, scaling inhibitors(Katasol type). 
Hydrogen sulphide corrosion inhibitor for gas industry (Katasol 28-5-AP) prevents general corrosion, hydrogen embrittlement and foaming. It is soluble in alcohols and hydrocarbons, it does not effect gas pipe-lines and gas compressor plants. It is also used in gas industry for etanolamine gas purification from hydrogen sulphide. Due to its anti-foaming ability plants process can be optimized and the output increased.
To protect oil production equipment from corrosion caused by contacts with oil medium containing hydrogen sulphide and carbon dioxide Katasol 28-2 and Katasol 28-5 are developed. Tests results show 91-97% protection in stratum mineralized waters containing hydrogen sulphide and hydrocarbon acid at the at the 20-50 g/m3 inhibitors concentration.
Pilot tests of Katasol 28-2 at Gojansk, Shamrt and Birkin fields of LLC “Lukoil-Perm” result in 88% metals protection at 40g/ m3 inhibitor concentration. The reagents of Katasol 28-5 are proved to act both as corrosion inhibitors and bactericides in the medium infected with sulphate reducing bacteria fully depressing their life activity. It provides 100% corrosion protection. Acid corrosion inhibitor Katasol 28-3 is recommended for increasing carbon oil collectors permeability. This inhibitor is 99,5% active with hydrochloric acids, with its mixture with hydrofluoric acid and low molecular weight organic acids. The tests were carried out in “Navoi Azot” and in the laboratory of of LLC “Flack”(Perm).
Scale inhibitors and water repellents (Katasol 28-1) are also produced for the latter is used for treatment a well bottom zone, changing the surface of capillary through which oil is inflows to the well, thus increasing well output.
We are ready to present to the customer all necessary documentation, product samples and send our representatives to provide all technical information.

Scientific-producing enterprise (SPE) Chemprom Service (conversed from Chemprom in 2006) operates at the chemical market since 1992.

Its main activity consists in developing compositions, technologies and production of cationic and amphoteric surface active agents and reagents based on them. Such as corrosion inhibitors, scale inhibitors, flotoreagents, foaming agents and detergent compounds. The special technological equipment makes it possible to produce up to 5 thousand products of 20 types.

Due to skilled and experienced staff and modern laboratory new compositions, techniques and modified products are developed.

A system of efficient quality product control is provided guaranteeing product stability.

 

 

Manufacture inhibitors corrosion   Manufacture inhibitors corrosion         
Manufacture inhibitors corrosion
Manufacture inhibitors corrosion

 

Delivery dates are reduced by availability of tank farm and raw materials.

Chemical products supplied by Chemprom Service are used in oil and gas industry as hydrogen sulphide, carbonic acid and other acids inhibitors, biocides water-repelling agents, scaling inhibitors(Katasol type). 

Hydrogen sulphide corrosion inhibitor for gas industry (Katasol 28-5-AP) prevents general corrosion, hydrogen embrittlement and foaming. It is soluble in alcohols and hydrocarbons, it does not effect gas pipe-lines and gas compressor plants. It is also used in gas industry for etanolamine gas purification from hydrogen sulphide. Due to its anti-foaming ability plants process can be optimized and the output increased.

To protect oil production equipment from corrosion caused by contacts with oil medium containing hydrogen sulphide and carbon dioxide Katasol 28-2 and Katasol 28-5 are developed. Tests results show 91-97% protection in stratum mineralized waters containing hydrogen sulphide and hydrocarbon acid at the at the 20-50 g/m3 inhibitors concentration.

Pilot tests of Katasol 28-2 at Gojansk, Shamrt and Birkin fields of LLC “Lukoil-Perm” result in 88% metals protection at 40g/ m3 inhibitor concentration. The reagents of Katasol 28-5 are proved to act both as corrosion inhibitors and bactericides in the medium infected with sulphate reducing bacteria fully depressing their life activity. It provides 100% corrosion protection. Acid corrosion inhibitor Katasol 28-3 is recommended for increasing carbon oil collectors permeability. This inhibitor is 99,5% active with hydrochloric acids, with its mixture with hydrofluoric acid and low molecular weight organic acids. The tests were carried out in “Navoi Azot” and in the laboratory of of LLC “Flack”(Perm).

Scale inhibitors and water repellents (Katasol 28-1) are also produced for the latter is used for treatment a well bottom zone, changing the surface of capillary through which oil is inflows to the well, thus increasing well output.

We are ready to present to the customer all necessary documentation, product samples and send our representatives to provide all technical information.